Common questions 

Is the NVG510 a modem and router?

Joe Ford

Is the NVG510 a modem and router?

The Motorola NVG510 is a combined ADSL2+/Router provided by AT for its U-Verse High Speed Internet Customers. It appears AT have been providing these modems since around August 2011.

How do I setup my AT Wireless Router?

Here’s how to set up your AT connection:

  1. Connect one end of the green data cable to the green broadband port on your gateway.
  2. Connect the other end to the AT Broadband jack in your wall.
  3. Connect the black power cord to the back of your gateway, and plug it into an electrical outlet.

How do I access my AT modem settings?

Modem & Router Settings

  1. From a device that is connected to the AT Wireless Internet network, open the web browser then go to http://attwirelessinternet.
  2. ACCESS MODEM SETTINGS: Click the Wi-Fi tab then click Edit under the desired Wi-Fi frequency band.
  3. ACCESS ROUTER SETTINGS: Click the Networking tab then click the LAN settings tab.

How do I reset my NVG510 router?

Motorola NVG510 Router Reset instructions: Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all lights flashing) The Motorola NVG510 router will reboot automatically.

How can I login to my router?

Finding your router IP address on an Android device Select Network & internet. Go to Wi-Fi and click on the Wi-Fi network you’re using. Hit Advanced. Your router’s default IP address is listed under Gateway.

How do I find the IP address of my AT Wireless Router?

Launch a browser window and navigate to the IP Address 192.168. 1.254 to access the GUI of your device.

What is IP allocation in WiFi?

To connect to a Wi-Fi network, your Android device has to be assigned an IP address. Without it, you’re not allowed to connect. The network’s router is in charge of assigning IP addresses. When it can’t assign one, you get the obtaining IP address error on Android.

Can ATT change your IP address?

AT provides dynamic (changing) IP Addresses by default (you can pay to get static which is not normal for residential services). You can’t change the IP manually, it’s assigned to you within AT’s network.

Does resetting your router change your IP address?

The common nature of DHCP is to “remember” the device and assign you the same IP address you had before, so simply turning off your router and turning it back on will not likely change IP address. However, if you try multiple times you may get lucky and will obtain a new IP address from your ISP.

How do I reset my AT IP address?

  1. How to Change IP Address ATT Uverse 2Wire Gateway Modem 1. Locate System Password printed on outside of modem.
  2. Select Settings Tab. Select LAN Tab.
  3. Select DHCP. Select Configure manually and enter in the displayed parameters.
  4. Select Save button. Enter System Password from step 1 and select Submit.

How do I change the IP address on my router?

How to Change Your IP Address on Android Manually

  1. Go to your Android Settings.
  2. Navigate to Wireless & Networks.
  3. Click on your Wi-Fi network.
  4. Click Modify Network.
  5. Select Advanced Options.
  6. Change the IP address.

How do I get to my wifi settings?

Swipe down from the top of the screen. Touch and hold Wi-Fi . To move between listed networks, tap a network name. To change a network’s settings, tap the network.

How do I find the username and password to my router?

To locate the default username and password for the router, look in its manual. If you’ve lost the manual, you can often find it by searching for your router’s model number and “manual” on Google. Or just search for your router’s model and “default password.”

How do I change my WiFi password if I forgot my username?

If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.

Why can’t I see my router on wireless?

There are a number of reasons why you might not be able to see your wireless network on the list of available networks from the system menu. If no networks are shown in the list, your wireless hardware could be turned off, or it may not be working properly. Make sure it is turned on.