Common questions 

How do I reset my spectrum modem to factory settings?

Joe Ford

How do I reset my spectrum modem to factory settings?

To reset your cable modem to factory default settings using the Factory reset software button:

  1. Launch a web browser from a computer or mobile device that is connected to your network.
  2. Enter your cable modem or modem router’s user name and password.
  3. Select ADVANCED.
  4. Click the Factory reset button.
  5. Click the OK button.

How do I reset my Comcast modem to factory settings?

A factory reset requires using a small object, such as a paper clip or pin, to hold in the Reset button on the back of the Gateway for 30 seconds until all the LED lights power off.

How do I reset my CenturyLink router?

Locate the Reset Button

  1. Locate the Reset Button. Look for the factory reset button on the back of your modem or router—it’s likely red.
  2. Use the Reset Button. To initiate the factory reset, press and hold the button for at least 15 seconds.
  3. Wait. Wait for at least 3-5 minutes for the factory reset to finish.

Why do modems need to be reset?

Rebooting your modem can fix Internet connection problems, improve slow moving connections and resolve wireless issues, which also affect your Digital TV service that is being transmitted over an internet connection. This will not cause any harm to your electronics as it is simply a way of rebooting the system.

What happens if I reset my modem to factory settings?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

What happens when you hard reset your router?

Once you reset the router, the settings will be reverted to its factory defaults. All of the customized settings of the router (Wi-Fi name (SSID), wireless security, etc.) will be erased. IMPORTANT: If you want to restore the router’s original settings without re-configuring it, you have to save a backup file.

How do I reset my router without reset button?

If your router doesn’t have a reset button, you will have to reset it using its configuration web interface….How to Reset a Router

  1. Keep your router plugged in.
  2. Find your router’s reset button.
  3. Use a paperclip to hold down the reset button for 30 seconds.
  4. Release the button.

How do I reset my 192.168 password?

How To Change WiFi Password?

  1. Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1.
  2. Enter the default username and password (admin/admin in most cases).
  3. Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .
  4. Enter your preferred password and Save the change.

Why is my wifi not working?

If your Android phone won’t connect to Wi-Fi, you should first make sure that your phone isn’t on Airplane Mode, and that Wi-Fi is enabled on your phone. If your Android phone claims it’s connected to Wi-Fi but nothing will load, you can try forgetting the Wi-Fi network and then connecting to it again.

How do I fix my WiFi not working?

Step 1: Check settings & restart

  1. Make sure Wi-Fi is on. Then turn it off and on again to reconnect. Learn how to connect to Wi-Fi networks.
  2. Make sure Airplane mode is off. Then turn it on and off again to reconnect.
  3. Press your phone’s power button for a few seconds. Then, on your screen, tap Restart .

How do I fix unable to connect to network?

Fix “Windows Can’t Connect To This Network” Error

  1. Forget The Network & Reconnect To It.
  2. Toggle The Airplane Mode On & Off.
  3. Uninstall The Drivers For Your Network Adapter.
  4. Run Commands In CMD To Fix The Issue.
  5. Reset Your Network Settings.
  6. Disable IPv6 On Your PC.
  7. Use The Network Troubleshooter.

What to do if the WiFi isn’t working?

1) Unplug your wireless router and modem from th power source (remove the battery if your modem has a battery backup). 2) Wait for at least 30 seconds. 3) Plug your wireless router and modem back into the power source again (put the battery back to the modem). 4) On your device, reconnect to your WiFi network.

Can’t connect to Internet after resetting router?

Assuming you meant a factory reset and not just a restart of the router, then you have probably lost the credentials from the router that are needed to connect to the ISP. If this has happened, then you need to log on to the router configuration pages and re-enter the username and password for the ISP login.

Can’t connect to this network even with correct password?

Sometimes wireless cards get stuck or experience a minor problem that means they won’t connect. Try turning the card off and then on again to reset it — see Wireless network troubleshooter for more information. When prompted for your wireless security password, you can choose which type of wireless security to use.

How do I reset my network adapter?

Resetting The Network Stack

  1. Type ipconfig /release and press Enter.
  2. Type ipconfig /flushdns and press Enter.
  3. Type ipconfig /renew and press Enter. (this will stall for a moment)
  4. Type netsh int ip reset and press Enter. (don’t restart yet)
  5. Type netsh winsock reset and press Enter.

What does Network Reset do?

You should reset your Android’s network settings if it’s having trouble connecting to Wi-Fi, Bluetooth, or cellular networks. Resetting network settings won’t delete any of your apps or personal data, but will erase saved Wi-Fi passwords and Bluetooth connections.

Does Network Reset help?

Use network reset It can also help to fix the problem where you can connect to the internet, but can’t connect to shared network drives. Network reset removes any network adapters you have installed and the settings for them.

How do you fix solution network reset?

To reset all the network adapters, use these steps:

  1. Open Settings.
  2. Click on Network & Internet.
  3. Click on Status.
  4. Under the “Advanced network settings” section, click the Network reset option. Source: Windows Central.
  5. Click the Reset now button. Source: Windows Central.
  6. Click the Yes button.

What happens if I reset my APN settings?

The phone will remove all the APN from your phone and add one or more default settings that it thinks are appropriate for the SIM you have in your phone. After this step, edit each APN in the list by tapping on it, From the menu, choose Delete APN.

Why can’t I edit my APN settings?

Sometimes, APN settings on your device for a particular carrier may be “locked” such that they are “grayed out” and can’t be modified. This is often an indication that they have been set by your currently connected carrier and that you shouldn’t need to modify them.