Common questions 

Are Homelite trimmers any good?

Joe Ford

Are Homelite trimmers any good?

It does fine, not as loud as my old Stihl but it did a good job. My only complaint is the fuel tank is too small, cutting down on use time. UPDATE: So far this summer the Homelite 26cc trimmer has proven to be a disappointment. It simply is not powerful enough to get the job done.

Who makes Homelite trimmer?

Techtronic Industries

Is Homelite made by Ryobi?

thanks. Yes Ryobi and Homelite are both currently owned and manufactured by the same company – TTI (TechTronics Industries) if the part number your machine uses is the same, the part is the same.

How many cc is a Homelite XL 12?

3.3 cu

Do you start a chainsaw with the brake on?

Always start your chainsaw with the chain brake engaged so the chain does not move.

How do you start a Homelite 330 chainsaw?

Push the trigger latch on the side of the handle in with your thumb and hold it in. Release the trigger under the handle, and then release the latch to start the saw.

How do you start a Homelite 240 chainsaw?

Place the chainsaw on level ground. Set the ignition switch to “run.” Pull back the chain brake, located on the top of the chainsaw, to the “run” position (vertically) with your left hand. Press the primer bulb, located on the back of the chainsaw, seven times.

What oil does a Homelite chainsaw use?

This chain is fed by a separate, automatic oil pump. The ideal oil for a Super 2 chain is Homelite Bar and Chain Oil. Clean SAE 30 oil can also be used to lubricate the chain, according to Homelite.

What is dirty wood?

Dirty wood is stuff that has been laying on the ground, or has dirt embedded in it. Or anything that has been skidded.

What is bar and chain lubricant?

Bar oil is designed to stick to the chain and bar of a chainsaw. It doesn’t come with a Society of Automotive Engineers (SAE) grade, also known as weight classification, similar to motor oil for your car, but instead is rated for summer or winter use.

Can I use engine oil as chain lube?

Usage of engine oil or grease is not at all recommended over a proper chain lubricant. Grease wont penetrate into the O rings and X rings as compared to chain lubricant. Whereas engine oil lasts only for a few days which reduces the life of your chain and sprocket.

Can I use 5w30 in my chainsaw?

You’ll be fine.

Can I use motor oil instead of bar and chain oil?

Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.

Is SAE 30 bar and chain oil the same as SAE 30 motor oil?

Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. SAE 30 w is usually a (non detergent) motor oil that is usually used on small engines like lawn mowers, generators, and other 4stroke lawn and garden tools. 30 is the viscosity or how think it is.

What is the best bar and chain oil?

  • Best Overall: Husqvarna Bar & Chain Oil, Quart.
  • Best Budget: Poulan Pro Bar & Chain Oil.
  • Best for Summer: MAXPOWER Bar & Chain Oil.
  • Best for Winter: Stihl Winter Grade Bar and Chain Lubricant.
  • Best for Cordless Chainsaws: Oregon Chainsaw Bar and Chain Oil.
  • Best Biodegradable: NV Earth Biodegradable Bar & Chain Oil.

Can you use wd40 on a chainsaw?

Before you put the chain back onto your chainsaw you will have to lubricate it to clean it, using WD-40® Multi-Use Product. Before refitting the chain into the chainsaw, wipe off all the excess residue and then reattach it to the guide bar.

Does chain oil go bad?

Chainsaw chain oil lasts between 4-6 years when it’s stored in an unopened container or an opened container that has been tightly sealed. Bar and chain oil should be stored in a dark, dry, cool location.

What weight is chain and bar oil?

Once temperatures rise, switch back to your standard bar and chain oil, which may be anywhere between 20 and 50 weight (30 weight is standard). Using winter oil during summer might leave a lot more oil on the ground because the thinner oil won’t adhere as well to the bar and chain.

What is a good substitute for bar and chain oil?

Chainsaw Bar And Chain Oil Alternatives

  • Motor oil. If you find yourself in a situation where you need to use your chainsaw but you don’t have any of the correct oil, one of the obvious options is motor oil.
  • Vegetable oil.
  • Canola oil.
  • Drained hydraulic fluid.

Does gear oil work for bar oil?

You can buy SAE 30 bar oil, and in my experience the regular stuff is a little thicker. Gear lube is about the same as SAE 40 engine oil (they are rated on different scales), so that would make standard bar oil and gear lube pretty close.

What type of oil is bar and chain oil?

canola oil